Home News About Us Contact Us

Sterile & Steam Cartridges:

D and DS Series

HCD Series

HB Series

ST-R Series


Back to Air/Gas Filtration & Compressors

HCD Series Filters

Overview

HCD series high-capacity culinary steam filters feature a pleated stainless steel mesh element allowing higher flows, excellent particle retention and longer service life at the lowest ΔP. The HCD elements also have a double "O" ring sealed Code 7 "Click-Lock" connection for positive location of the filter element. Besides, end caps are welded making the HCD ideal for continuous duty in demanding high temperature applications.

Although the 3-A standard only calls for a 2 micron filter rating at 95% efficiency (Section D2.2), the HCD element is capable of trapping particles to 1 micron at 99% efficiency. Superior performance means longer service life for sensitive downstream equipment and products.

Another exciting development is the a DG housing for large capacity steam systems. The DG19HCD and DG20HCD Flanged Filter housings feature 316L construction, 3" flange and 4" ANSI flange connections, respectively. Most importantly, the opening at the inlet of the filter element is the same diameter as the inlet/outlet of the housing enabling steam flows of over 10,000 lbs./hour through a single element.

Features

Exceeds 3-A standard.
Pleated stainless steel element.
High flow rates with lowest ΔP.
High temperature range.
Welded end caps with double "O" ring sealed "Click-Lock" connections (Code 7).
Particle retention to 1 micron at 99% efficiency.
Single element configuration for flows to over 10,000 lbs./hour.
Complete culinary steam packages available.
Easily cleaned with HCL for reuse.

Specification

Series HCD Culinary Steam Filters

Micron rating 1 µ (nominal)
    F 212 250 275 293 308 320 331 342 350
    C 100 121 135 145 153 160 166 172 177
    psia 15 30 45 60 75 90 105 120 135
Filter
Housing
Filter
Element
psig 0 15 30 45 60 75 90 105 120
Conn. Flow (lbs./hour) at the above temperatures
S02HCD HCD09T 1/4" 6 11 17 22 28 33 39 44 50
S05HCD HCD09T 3/8" 13 26 40 53 66 79 92 106 119
S07HCD HCD09T 1/2" 23 46 69 92 116 139 162 185 208
S09HCD HCD09T 3/4" 51 101 152 202 253 304 354 405 455
S11HCD HCD13T 1" 88 176 264 352 440 528 616 704 792
S12HCD HCD13T 1-1/4" 121 242 363 484 605 726 847 968 1089
S13HCD HCD13T 1-1/2" 132 264 396 528 660 792 924 1056 1188
S14HCD HCD14T 2" 351 702 1053 1404 1755 2105 2456 2807 3158
S15HCD HCD18T 2" 351 702 1053 1404 1755 2105 2456 2807 3158
S18HCD HCD18T 2-1/2" 549 1098 1647 2196 2745 3293 3843 4391 4940
S19HCD HCD19T 3" 637 1273 1910 2547 3184 3820 4457 5094 5731
DG19HCD DPL19 3" Flg. 1267 2534 3802 5069 6336 7603 8870 10138 11405
DG20HCD DPL20 4" Flg. 1422 2845 4267 5689 7112 8534 9956 11378 12801

Initial pressure differential = 1 psi at rated flow
 

Phone (403) 287-2345 Toll-free 1-(800)-565-2345 Fax (403) 287-1355 E-mail: sincaninc@telus.net

© 2006 Sin-Can Inc. All rights reserved.