Home News About Us Contact Us


Back to Food and Beverages Cartridges



High Flow Tetpor II gas sterilisation filters have been developed to benefit from technological advances within the manufacture of PTFE membranes. This new generation of filter sets the standard with an unrivalled combination of efficiency, flow rate and strength.

The High Flow Tetpor II will provide full retention of bacteria, viruses and particulate in process air and gas streams while providing unrivalled flow rates. Subtle changes to the structure of the PTFE have also resulted in the production of an extremely robust product now validated for 225 steam sterilisation cycles at 142C.

The combination of non-woven supports upstream of the membrane and an expanded net layer downstream has significant benefits. It provides increased protection and service life while guaranteeing zero fibre shedding into the process.

The High Flow Tetpor II is suitable for all sterile gas applications including fermentation inlet and off gas streams, venting, lyophilisers, autoclave vacuum breaks and blow-fill-seal equipment as well as the provision of particle free air within the electronics industry. The combination of a fully validated filter with substantially increased strength make the High Flow Tetpor II the filter of choice when sterility is of paramount importance.


Optimum pleat configuration.
Integrity testable by all methods including Water Intrusion Test.
Unrivalled flow rates combined with low pressure drops.
Steam sterilisable up to 225 cycles at 142C (287F).
Fully validated to ASTM F838-83.
Fully validated to aerosol bacterial and viral challenge.

Further Information

Please refer to HIGH FLOW TETPOR II Brochure for details and catalogue numbers. You are welcome to contact us with any questions and for additional information. To learn current prices, please send us a quotation request.

Phone (403) 287-2345 Toll-free 1-(800)-565-2345 Fax (403) 287-1355 E-mail: sincaninc@telus.net

© 2006 Sin-Can Inc. All rights reserved.