Home News About Us Contact Us

 

Back to Materials Handling

Schenck AccuRate Products



Feeders

If you wish an assistance in choosing an appropriate model for your application, please fill in and send us a questionnaire.

Product Features Documentation
Gravimetric Screw Feeders
CONI-FLEX "LC" Series Low-range minor ingredient screw feeder.
Theoretical feed rates from 0.002 to 23 cubic feet per hour (0.059 to 650 litres).
Complete disassembly from the non-process side.
Datasheet
CONI-FLEX "MC" Series Mid-range screw feeder.
Theoretical feed rates from 0.05 to 330 cubic feet per hour (1.4 to 9,300 litres).
Fully accessible from the non-process side.
Can be upgraded from volumetric feeder to gravimetric feeder.
A unique conical mass flow hopper design.
Coni-Flex flexible hoppers.
Datasheet
3-A Sanitary "MC" Series Designed for use in the food, dairy, and pharmaceutical industries, meets 3-A Dairy sanitary levels or equivalent.
Feed rates 0.30 to 330 cubic feet (8.5 to 9,300 litres) per hour.
Ability to disassemble, clean, reconfigure, and service the feeder from a non-process side.
Datasheet
CONI-FLEX "HC" Series High-range screw feeder.
Theoretical feed rates from 0.3 to 1,137 cubic feet per hour (8 to 32,160 litres).
Three load cells.
Complete disassembly from the non-process side.
Heavy duty and configurable.
Cast aluminum and stainless steel frame.
Coni-Flex flexible hoppers.
Up to 13,300 lb. scale configurations.
Fully integrated and pre-wired controls.
Datasheet
CONI-STEEL "LS" SERIES Low-range minor ingredient screw feeder.
Theoretical feed rates from 0.02 to 23 cubic feet per hour (.57 to 650 litres).
Internal vertical agitator.
Complete disassembly from non-process side.
All stainless steel construction
Datasheet
CONI-STEEL "MS" SERIES Mid-range screw feeder.
Theoretical feed rates from 0.14 to 330 cubic feet per hour (4 to 9,300 litres).
Stainless steel construction.
Internal vertical agitator.
Datasheet
Vibratory Feeders
SOLIDSFLOW 2000, USDA accepted Designed specifically for use in the food, dairy, and pharmaceutical industries where equipment and processes must meet stringent sanitary levels. Feed rates up to 341 cubic feet (9,657 litres) per hour. Datasheet
SOLIDSFLOW 2000 Wide range of sizes.
Predictable feed rates.
0.2 to 3,100 cubic ft/hr.
Datasheet
SOLIDSFLOW 4000 Offset discharge Accurately meters bulk solids continuously or in batches through an offset discharge point.
Ideal for cluster feeding applications.
Simple - no moving parts, no flow-aid devices needed.
Outstanding batch accuracies.
Datasheet
SOLIDSFLOW 5000 Streamout Continuously and uniformly spreads e.g. salt, powdered sugar, powdered cheese or some other dry spice over another conveyed product.
Streams 6" to 66" wide.
Simple, reliable controlled flow without flow-aid devices.
Low initial and operating costs.
Datasheet
SOLIDSFLOW 6000 Controlled Rate Discharger Reliable, uniform, continuous, non-segregated mass flow from silos or bins.
0.8 to 1,500 cubic ft/hr.
Eliminates need for secondary feed control devices.
Low initial and operating costs.
Datasheet
SOLIDSFLOW 7000 Fibrous Material Feeder Handles stranded fiberglass and carbon fibers from 1/8" to 2" long.
Minimizes "clumping".
Simple design, low operating costs.
Instant cut-off for optimal batch accuracy.
Datasheet
SOLIDSFLOW 7600 Automated Box Dump Refill Accepts a container hoisted by a forklift and inserted into the box dumper.
Totally enclosed system.
Continuous loss-in-weight or batching.
Automatic refill.
Datasheet
Volumetric Feeders
TUF-FLEX Series Food grade and industrial vinyl hopper.
Dual paddle action.
Feed rates from 0.000017 to 280 cubic ft/hr.
Deviations from ±0.5% to 3% for most materials.
Datasheet

Back to the top

Mass Flow Meters

If you wish an assistance in choosing an appropriate model for your application, please fill in and send us a questionnaire.

Product Features Documentation
Multicor Series Coriolis force principle.
Ideal for feeding, measuring and batching applications involving reasonably free-flowing dry materials.
Flow rate and total weight values at accuracies of 0.5%.
Flow rates up to 10,500 cubic ft/hr.
Performance is not affected by material density, friction or in-feed drop height.
Low installed height.
Brochure; Multicor S40; Multicor S80; Multicor S160
DLM Solids Series Deflection chute measuring principle.
Ideal for relatively high flow rates of free-flowing or pulverized materials.
Accuracies generally better than 2% and with repeatability of 0.5%.
30 to 600 tons per hour.
Material temperature from 0 to 500F (260C)
Datasheet
Multistream B-80 Series Impact plate measuring principle.
Flow rate and total weight values, with accuracies of 2%.
Compact design - no loss of headroom due to additional chutes.
Dust-tight stainless steel housing.
Cost effective, simple integration: offset-free arrangement of inlet and outlet.
Weighing electronics can be integrated in the mechanical system.
Datasheet

Back to the top

Weighbelts and Belt Scales

If you wish an assistance in choosing an appropriate model for your application, please fill in and send us a questionnaire for weighbelts or a questionnaire for belt scales.

Product Features Documentation
DEA Weighbelt Feeders For applications ranging from pasta to plastic pellets which could be damaged in a traditional screw feeder; abrasive materials that can damage other types of feeders; materials with large particles that may not fit through a screw feeder; free-flowing materials; applications where headroom is limited.
12" and 24" belt widths.
Easy belt removal.
Feed rates up to 1,680 cubic ft/hr.
Brochure;
Datasheet
DMC/DMO Weighfeeders 24" to 54" standard belt widths. Special designs up to 84" available.
Easy belt removal.
Feed rates up to 500 tons per hour standard. Higher capacities available.
Datasheet
Belt Conveyor Scales Ideal for high belt speeds and shock load applications.
Monitors rate, totalizes weight, speed and load of conveyors.
For continuous flow rates up to 15,000 tons per hour.
Uses 2 NTEP approved single point load cells.
Easily mounted whether a conveyor uses 18" or 60" wide CEMA idlers.
Datasheet;
Installation planning

Back to the top

Bulk Bag Discharge Systems

If you wish an assistance in choosing an appropriate model for your application, please fill in and send us a questionnaire.

Product Features Documentation
SacMaster PLC controlled "Posi-Flow" adaptive bag agitation.
Hoist or fork lift bag loading.
Bag tensioning and bag liner management.
Height adjustability, space efficiency.
Datasheet

Back to the top

Controls

Product Features Documentation
Volumetric (Variable Speed Drive) Controls
SCR1 Drive Feeder Control DC motor speed and torque control for applications with minimum control requirements.
Watertight for washdown applications.
Selectable AC line voltage or DC armature voltage.
Electronic overload protection
Datasheet
PWM Drive Feeder Control Delivers almost pure DC current to a motor, which provides a cooler, quieter motor and also extends the motor brush life.
Touch pad potentiometer.
Easy installation.
Datasheet
"VAC-Series" Feeder Speed Controls Standard control packages for applications involving a single volumetric feeder.
Combines variable frequency AC drive with various operator interface options in both NEMA 4 and 4X type enclosures.
 
Gravimetric (Continuous) Controls
INTECONT PLUS Offers enhanced operating reliability through diagnostics and self-testing functions. Application specific functionality, integrated display and control panel, high operating convenience, and automatic calibration programs. Brochure; Datasheet for feeding; Datasheet for measuring
DISOCONT "DS" Series For applications involving a single Loss-in-Weight (continuous) feeder, Loss-of-Weight (batching) feeder, Weighfeeder or Mass Flow Meter. Datasheet; Specification; Components
PROFIBUS-DP FIELDBUS INTERFACE MODULE Enables a plant PC or PLC (programmable logic controller) to directly control a DISOCONT based control system via the Profibus-DP communication protocol. Datasheet
DEVICENET FIELDBUS INTERFACE MODULE Enables a plant PC or PLC (programmable logic controller) to directly control the DISOCONT based control system via the DeviceNet communication protocol. Datasheet
MODBUS FIELDBUS INTERFACE MODULE Enables a plant PC or PLC (programmable logic controller) to directly control a DISOCONT-based control system via the Modbus communication protocol. Datasheet
MODBUS ETHERNET INTERFACE MODULE Enables a plant PC or PLC (programmable logic controller) to directly control a DISOCONT-based control system via a standard ethernet cabling system.  
Gravimetric (Batch) Controls
DISOMAT B+ Compact fully equipped weighing terminal.
Industrial fieldbus connectivity.
Integrated legal-for-trade memory (optional).
NTEP certificate of conformance.
Large LCD screen and keypad.
Datasheet
Group Manager Controls
DG-2000 Group Manager Displays feed rates, hopper levels, material usage and operating status, graphics, trending and touch-screen operation to the DISOCONT Gravimetric Control Family. Up to 16 gravimetric screw feeders, weighfeeders, solids flow meters or pumps can be graphically configured and monitored. Datasheet

Back to the top


Phone (403) 287-2345 Toll-free 1-(800)-565-2345 Fax (403) 287-1355 E-mail: sincaninc@telus.net

© 2006 Sin-Can Inc. All rights reserved.